DIY bench for the Jet JML-1014I mini lathe

DIY bench for the Jet JML-1014I mini lathe

MusicalBox
I designed this bench to support the Jet JML-1014I mini lathe (without the extension). It is pretty effective for dust and wood shavings collection. By "effective", I mean around 40% effective. I don't think we can expect more than than on a lathe.The model can be easily modified to place the 4" dust collection port on the right side of the bench instead of the left side. The small 3/16" board siting on top of the bench "roof" is used to cover the hole under the lathe in case you have to work on the lathe itself (like repairs and/or installing/removing attachments). It prevent tools and other stuff from falling down in the lower part of the bench. Just raise the front Plexiglas panel and slide the board between the lathe and the bench. NOTES : 1- I didn't design the lathe shown in this model. It is the excellent work of August Daniel Coby. 2- The bench should also fit the new JWL-1015 model and probably other brands of mini woodworking lathes. However, alterations to some parts might be necessary. 3- I didn't install yet the led strips shown on the plan but it should be a very useful addition to the bench. #DIY #Jet_tools #Lathe #Mini_Lathe #woodworking #work_bench #workbench
Default Title