Lettered and CAM in Aspire. Covered 3/4" MDF with sign vinyl, routed pockets and v-carve toolpaths, painted, covered with 2nd layer of vinyl to keep dust off fresh paint, cut outside profile, and finally removed vinyl. Lots of steps but a really quick job to cut/paint. Credit to unknown source for plane vectors.
Cut with Kodiak 1/8 and 1/4" solid carbide end mills and 90 degree drill-mill.
Vinyl works better than any masking tape - especially at high feeds with flat end spiral bits.
#airplane #child #cnc #crop_duster #name #plane #router #sign #vcarve