Closed table Dimensions: 0.9 m Height, 2.5 m length, 1.5 m width
Open table Dimensions: 0.9 m Height, 7.3 m length, 1.5 m width
This table was intended to be an efficient piece of furniture for small houses, or big families that would like to make the most out of their available space in the dining room. This table is used as a counter which is able to store things underneath, and it also has a practical surface to prepare meals. After dinner is ready just slide the lower bottom of the table. The table will be able to expand up to three times its original surface area in others to accommodate big families. This means that you will save up to 66 % more space when the table is completely stored inside the counter. After dinner is finished just slide the table back inside to have more space in the dining room.
This model is hazard free. It requires almost none skill and anybody is able to slide the table. After using the table everything must be completely removed from the table before sliding the table back in the counter. If the table is not clear, anything on the table will fall and possibly break. The torque of the table caused on the table is counteracted by a single leg. The leg is only meant to be used when the table is full of objects. In other words, the table is able to withstand the torque of its weight without the leg extended as long as the table is empty, this will facilitate the assembly (setting the table’s leg).
The design was specifically thought to be efficient, practical, minimalistic, and elegant. The materials used in this particular model use a mix between wood and marble, this gives the elegant touch with the magnificent texture of the stone. The table is preassembled normally, though it also can be ordered unassembled with basic instructions on how to assemble it. The table is attached to the ground to counteract the torque or the furniture piece.