This is a cabinet designed to hang on a french cleat. The modular design means that any number of cabinet cases can be built and arranged neatly along a wall. The inside of the cabinet can be configured with shelves or without. Doors are optional.
The 3/4"-thick sides, top, and bottom are all the same length making for simple cutting and assembly. The top and bottom are attached to the side using pocket hole joinery. The pocket holes are made using a pocket hole jig from Kreg Tool.
The 1/2" plywood back is joined to all four case components with micro-pocket holes.
No glue is necessary during assembly.
Shelf pins are drilled with the aid of a Kreg Shelf Pin Jig using a 1/4"-diameter drill bit. The holes are spaced vertically every 32mm. I used 3 rows of holes to accommodate a narrow or wide shelf, depending on storage needs.
#cabinet #modular #shop #wall_cabinet