Aurora LED Square Edge 2.0

Aurora LED Square Edge 2.0

PureLighting
MR16 LED 7W–9W 12VAC, equivalent to 50W or 65W halogen. 10, 15, 25 or 36 degree beam spread options. Lamps sold separately. Only use LED retrofit lamps designed for use in enclosed fixtures. Lamp: MR16 LED 7W–9W 12VAC, equivalent to 50W or 65W halogen. 10, 15, 25 or 36 degree beam spread options. Lamps sold separately. Only use LED retrofit lamps designed for use in enclosed fixtures. See www.purelighting.com for a list of recommended lamps. Adjustability: Hot aiming with Philips screwdriver offers 0 to 42 degrees vertical adjustment and 362 degrees horizontal rotation without beam clipping. Precision machined gear adjustment is concealed behind the lamp. Features self locking tilt and manual locking horizontal rotation. Housing: .040" (1mm) thick die formed aluminum. Includes 12V 15W electronic low voltage transformer for MR16 LED. IC and air-tight, suitable for remodel or new construction. Dome: Spun aluminum, anodized to a soft haze finish. Hides electrical hardware and tilts for easy access to junction box and transformer Plaster Plate: 11 7/8" (301mm) x 9 1/4" (235mm) x 1/8"(3mm) aluminum plaster plate, primed and mounted flush with ceiling. Apply Durabond®* ceiling compound at the perimeter of the housing. Use the supplied ultra-thin FibaTape®**. This prevents chipping and cracking at the trim aperture, which is common with other trimless fixtures. Mounting: Self leveling u-shape telescoping hanger bars extend to allow mounting between studs 13 1/4" - 24" (336-609mm) O.C. Mounting is suitable for new and remodel commercial or residential drywall construction. Designed to accommodate ceiling thickness from 1/2" (13mm) to 1 1/4" (32mm). Notch and label marking for laser alignment. Trim: Precision-machined aluminum 3.5" trim with a 2" Knife Edge aperature. Flangeless, flush trim installs into the plaster plate with a precision snap-fit. Snoot: Machined aluminum snoot controls internal spill light. The snoot secures the lamp to the Pan Tilt Mechanism and allows for easy relamping. Electrical: 120VAC (standard), 230VAC, or 277VAC input, 12VAC 15W MAX output. Dimmer Type: Compatible with most ELV dimmers. Refer to lamping specs for list of compatible dimmers.
Default Title