CubeFrame_10-23-2015

CubeFrame_10-23-2015

CubeSpawn
Description
Updated 10-23-2015 The link below is to a photo of the "As Built" prototype Here is the enclosure, including the Backplane Assembly. Note a couple things will be added to this: Side openings for a power connector, Actuation to engage the (Male) side plug Heat from these units will be vented to the open side until a more deterministic solution is needed BOM For Enclosure (CubeFrame) (QTY) Description (1)544x25x75 mm aluminum extrusion bar (8)25mm 3 way keyed corners (8)25x25mm 90 Deg angle brackets (10)596x297x3mm Aluminum skin plates (16)544x25x25mm aluminum extrusion bars (24)M6x1x22mm button head socket head cap screws (BH-SHCS) (40)M6x1x10mm Pan head socket head cap screws (FH-SHCS) (166)M6x1x10mm flat head socket head cap screws (PH-SHCS) (166)M6x1 Weld Nuts (22)M6x1x10mm button head socket head cap screws (BH-SHCS) (12)Rail Spacers (4)Rails (Part # THK FBW256OR 560L) BOM for BackPlane (Soon) #3_Axis_Mill #3D_printer #CubeSpawn #Flexible_Manufacturing_System #FMS #Maker #open_source #OpenBuilds
Category
Default Title