Victaulic fittings for AWWA size pipe are supplied with rigid radius grooves in accordance with ANSI/AWWA C-606. Fittings conform to ANSI A21.10/AWWA C-110 for center-to-end dimensions and AWWA C-153 or ANSI A21.10/AWWA C-110 for wall thickness.
While most requirements are specified “black” or non-coated, fittings can be supplied with an alkyd-phenolic primer, or bituminous coating. Coal tar epoxy and other coatings are also available. The standard black asphalt coating used on our cement lined AWWA size fittings is NSF 61 Listed. Cast surfaces will be provided with surface equivalent to SSPC-SP6 prior to coating unless specified otherwise. Fittings are available with flanged ends wherever grooved ends are shown.
Linings include cement/mortar Type 2 (standard) and others. Fittings can readily be prepared for glass lining by others.
Fittings are rated for working pressures to 350psi/2400kPa (ductile iron) in
3 – 12"/80 – 300mm sizes and to 250psi/1725kPa (gray iron) in sizes 3 – 12"/
80 – 300mm, and to 250psi/1725kPa (ductile iron), or 150psi/1035kPa (gray iron) for 14"/350mm and larger. Victaulic fittings shown have an end-to-end dimension tolerance of ±1⁄8" in all sizes and styles.
#Grooved_Fitting #Gruvlok #Naz