Woodworking Vise Hardware

Woodworking Vise Hardware

SchreiberBike
This hardware is designed to be used as part of a woodworking vise. It is the nicest I have found. The quality is very high and the parts fit together well without any apparent slop. I purchased this through Woodcraft as Front Vise 17D04 with installation instructions at <http://www2.woodcraft.com/pdf/77A42.pdf>. Critical measurements are as accurate as I was able to make them. It is also offered in Germany by Dieter Schmid Fine Tools as Large front vise - Vorderzangenführung 300654. I have read that it is made by Gebruder Busch (makers of the Hirsch Trademark), but I have been unable to independently confirm that. The marks GBE126 or GBE 126 appear on each piece. The face plate is marked 3164 and the handle tee is marked MADE IN GERMANY. Each part is also marked with a letter B in a circle. Note that although the quality is better than other vise hardware I have seen, the plate which mounts to the workbench is not quite flat. That slight curvature is modeled. A simplified version of this vise, using only 79kb is posted as Woodworking Vise Hardware - Simplified. #126 #3164 #GBE #GBE_126 #GBE126 #hardware #MADE_IN_GERMANY #tool #Vice #Vise #vise_hardware #Woodworking #Workbench
Default Title