G0704 Y-Axis CNC Conversion

G0704 Y-Axis CNC Conversion

Donald F.
This model is similar to the Hoss Conversion except using a purchased Nema 23 mount. the mount is a solid alum cube 2.22 sq and 1.93 long with a slot to access the odham coupler.my plan is to mount the cube slot side down. And mill the top .21 deep to within .5 of the motor side, this will allow clearance for the Y axis travel to be extended (using the hoss method) this bearing block sets the ball screw down .125 from the original (Hoss Method) this minimizes the amount of material needed to be reomved from the top. #CNC #G0704 #YAxis
Default Title