This was hard… to be continued 1.Process: I went about constructing my block piece by forming extended archways with the arch block and the long block. The long rectangle blocks were also used to fill in the four-walled structure. Long wedges were added on top of the wall and cylinders at each corner to complete the structure. I grouped the blocks making one wall so that I could duplicate it and make the second wall with less hassle. 2.Challenges: I faced quite a few challenges while making my structure such as aligning he blocks on each plane so that they were straight and connecting at the same level. 3.My structure turned out to be somewhat of a hovering tower. There are part of the long walls that do not start at the same height in space. I think my creation is significant because it still looks cool although it needs some adjustment. Knowing what I do now I would look my building over from different angles to make sure that all of the blocks are aligning in both height depth and width. 4.I would advise people doing this project for the first time to take their time, start small and with a simple idea to slowly build upon while constantly looking at their structure from different angles.