3D model of a Federal Signal Thunderbolt blower skid for a Series C Thunderbolt blower. Measurements taken from an actual factory-supplied skid made in 1984. Measurements are within 1/4 inch increments on wood cuts, and within 1/8 inch increments on holes to be drilled for bolts. Exact hole placements and measurements not garunteed, please check your blower frame's specs and make a test fit before drilling holes for bolts. Remember the old quote- measure twice, cut once.
For non-commercial, private use only.
Scale: Full Scale
Units: Inches
By:
Charlie Davidson
DavidsonFireAlarms.com
P.O. Box 1165
Dickson, TN 37056-1165
Date: 10-30-2010 #Blower #Federal #Series_C #Signal #Siren #Skid #Thunderbolt
- Comments
