Models of the pocket hole screw system in various levels of detail. These models are based on attaching a 3/4" plywood board to a 1/2" plywood board with a reinforcing dado. A Kreg SPS-C1 pan head - 1 inch - course screw is used. The website below references the Kreg system.
A simplified model is listed as "Pocket Hole Screw - 1" Screw - Simplified" and other lengths and styles of screws will be posted. - - - - - 20081008 Corrected scale and reposted. #Kreg #Kreg_Jig #Pocket_Hole #Pocket_Hole_Screw #Pocket_Holes #pocket_screw #pocket_screws #Screw #SPSC1