This is a further update of my other quads.
i use 2206 motors, Naze32, 20a Litlle bee escs, foxeer pdb, 1300 to 1800 lipo batteries , 4 cell. 5 or 6" propellers.
fast and agile racing drone for naze 32 and cleanflight.
For radio transmitter i use FRsky Taranis, the recivers i have used is the D4R2
el parts and spacers & 3mm screws i purcased at Hobbyking and survailzone
spacers are, 30mm, 20mm, 8mm.
(i used 35mm + 13mm + 20mm pacers when i built this one, to have some more space for the camera)
(and i also used 2mm thick 3mm nylon nuts as spacers around the PDB + 6mm nylon spacers on the opposite side + nylon screws)
if i build 1 more of this i will make the topp plates 1.5mm instead of 2mm.
so only the "main plate" will be 2mm.
Just remeber that carbon fiber does lead el currant, so be carefoull with the powerdistribution board, and isolate it proparly. ;)
The blue multicopter i made first. using blue carbon fiber.
The grey one is a further development to archeeve better / lower center of gravity. i used Emax rc 2205 motors, aomway 200mw fpv transmitter with aomway blue antennas. for fpv camera i used foxeer 600tvl. that was a very nice and powerfull combo. can be recomended.
i also used qav 2206 motors from survailzone on my first buildt, also very nice motors.
http://www.surveilzone.com/FPV-Products
I used 1,5mm & 4mm carbon fiber plates. but 2mm can also be used for the body.
Blue carbon fiber plates i baught from:
Merry
Sales Dept.
xc composite co. ltd
Website :www.xccfrp.com
Tel:86-769-88516671 Fax:86-769-88512171
Mb:86-15818622357
Email:info@xccfrp.com
Skype:merrymero
They had other colors to.
For tutorials on how to wire up and tune the quad you can do an youtube search for:
painless360 he has a lot of diffrent how to movies.
https://www.youtube.com/channel/UCp1vASX-fg959vRc1xowqpw
Flight test:
https://www.youtube.com/channel/UC9zTuyWffK9ckEz1216noAw
Rc modell rewievs also have a lot of good ones.
https://www.youtube.com/channel/UCahqHsTaADV8MMmj2D5i1Vw
BSMweb:
https://www.youtube.com/channel/UCOT48Yf56XBpT5WitpnFVrQ
Fly Pilot:
https://www.youtube.com/channel/UCdA5BpQaZQ1QUBUKlBnoxnA
For piloting skills you can search for names like:
Charpu, mr steel, finalglideaus, mattystuntz, borisb, metalldanny and many more.
For more information, visit:
https://www.youtube.com/watch?v=BJrrZxQ0Jus
#2205 #2206 #250 #270 #bolt #carbon_fiber #cc3d #cnc #cobra #DIY #dl #drone #dys #emax #flight_controller #FPV #fr_sky #G10 #home #homemade #hs1177 #kiss #lipo #made #multikopter #multirotor #naze32 #night_hawk #plans #qav #quad #racing #rcinpower #shendrone #taranis #tbs #turnigy #vendetta #vortex #zmr
- Comments