Nitecore D4 Battery Charger Wall Mount

Nitecore D4 Battery Charger Wall Mount

drwoo ..
Description
Here we have a wall mount for the Nitecore D4 Battery Charger. The mount gets attached with two 3.5 mm screws (length is up to you), and the charger perfectly snaps in. You need to drill two vertically aligned holes into your wall with a distance of 46 mm (no worries if the distance is slightly off, the screw holes in the mount have been designed with tolerance in mind; note that the first version I had uploaded had different screw hole distances between the flat and the tilted version, which now have been unified to 46 mm). There is a flat version and a tilted version with 10° angle, which in my opinion is more convenient for inserting/removing the batteries and reading the display. The tilted version also has cut-outs for the power cord, in case you want to route the cord downwards. The SketchUp file includes a quite accurate model of the Nitecore D4 enclosure, which I created for reference. The wall mount is of course printable. For details on how to print and to download ready-to-use STLs see Thingiverse link below. There is quite a bit of work in this, so if you print & like it, I'd be thankful for a small donation in EUR or USD: https://PayPal.Me/wookbert. Thanks a lot! #battery_charger #D4 #Nitecore #Wall_Mount
Default Title