131.033 - Geberit Monolith sanitary module for floor-standing WC, 114 cm, with P-bend, water supply connection, rear centre

131.033 - Geberit Monolith sanitary module for floor-standing WC, 114 cm, with P-bend, water supply connection, rear centre

Geberit
Application purpose: - For floor inlets - For renovations, conversions and new buildings - For wall inlets with an inlet height of 18 cm - For replacing floor-standing WCs with concealed cistern with maximum service opening height < 109 cm - For replacing low-level exposed cisterns - For replacing half-high level exposed cisterns - For replacing floor-standing WCs with close-coupled exposed cistern - For connecting Geberit AquaClean Sela floor-standing WC - For replacing pressure flushing valves - For mounting on finished floors - For installation in front of drywalls or solid walls Characteristics: - Dual flush - Compensation of dimensional tolerances possible - Front cladding made of glass (ESG) - Fastening height WC ceramic appliance 35 ± 1 cm - Cistern fully insulated against condensation - Side cladding made of aluminium brushed - Self-supporting - Adjustable flush volume - Water supply connection, rear centre - Water supply connection on the left/right possible - Water supply connection on the bottom possible Technical data: - Flow pressure0.1-10 bar - Minimum flow pressure0.5 bar - Maximum operating temperature, water25 °C - Flush volume, factory setting6 and 3 l - Flush volume large, adjustment range4.5 / 6 l - Flush volume small3 l - Calculated flow rate0.11 l/s Scope of delivery: - Water supply connection set with 2 angle stop valves, 1/2" - Flush bend extension 160 mm - Connection bend made of PP, ø 90 mm - Sleeve made of EPDM, ø 44 / 55 mm - Adaptor socket made of PE-HD, ø 90 / 110 mm - Fastening material Article: 131.033.SI.5white glass 131.033.SJ.5black glass
Default Title