Mount for AC50 motor when used with the Canadian EV Porsche 914 adapter. Mounting holes are slotted for 1/2" standard threaded holes on encoder end plate of motor. 90 degree bend must be made along a horizontal line parallel to the bottom of the plate, exactly 4 inches up from the bottom. Bend must be made AWAY from viewer when the top slots are at the 10 o'clock and 1:30 positions. Bend is made to allow for 1/2 inch spacers between the motor end face and the mounting bracket, so the encoder wire can pass through. Small 1/16 inch holes in the base of the plate are supplied as suggested position for drilling cross-member mounting holes.