Geared Continuous Hinge (Full Surface, 200 cm, Closed)

Geared Continuous Hinge (Full Surface, 200 cm, Closed)

Glenwing
Geared Continuous Hinge, Full Mortise, 200 cm, Closed Position This model is a 200 cm length version (78.7"), which is the standard length used for 80" American doors (allowing some clearance, since most actual doors are around 79–79.5"). Full Surface: This hinge is designed to be mounted by bolting it to the flat surface of the door (either the interior or exterior surface of the door) as well as the interior or exterior surface of the frame/wall. For hinges designed to be mounted against the side of the door and frame, look for a full mortise or half mortise/half surface hinge. Note: Gear mechanism has been drawn by eye, and is not based on the specifications of any real equipment. Model is intended for aesthetic use only. Not intended as a template for fabrication. Revision 00 (March 9, 2019):   • Initial version
Default Title